THE COMPLETE SIM RACING GUIDE – Everything you need to know about Sim Racing Wheels & Wheel Bases
Hello and welcome back to part 3 of our complete guide to sim racing video series. So far we’ve taken a look at some of the key fundamentals you need to understand as you start your sim racing journey, and taken a deeper dive into the world of sim racing pedals, so be sure to […]
First Drive & Quick Tour of my Dream Sim Racing Rig
This is it guys! Today we fire up and go for the first drive (as well as take a quick tour) of the new Sim-Labs P1X based sim rig. No doubt there will be some fine-tuning to do from here, and I still have a few bits and pieces to finish off around mountings and […]
DIY SIM RACING WIND SIMULATOR – We Nailed It!
How to Build a Wind Simulator Today we tackle the Arduino-powered DIY Wind Simulator build! We’ll find: How hard is a Wind Simulator to build? How to choose the best components for your build How much does a wind sim add to the driving experience? Is it worth making a DIY wind simulator for […]
THE FANATEC DD2 REVIEW – Part 3 – Driving Tests – The Verdict & Fanatec vs. Simucube
Over the last few days, we’ve taken a look at the hardware, the software and the Fanatec ecosystem in detail. We’ve discussed and compared some of the hardware elements of the Fanatec Direct Drive wheelbases with their Simucube counterparts, and looked at the vitally important role that drivers and software play in the overall driving […]
THE FANATEC DD2 REVIEW – Part 1 – The Hardware
Today we get started on our review series on Fanatec’s top of the range Direct Drive Wheelbase, the DD2. As the product has been on the market for a while now, I’ve taken a slightly different approach with this series and tried to include a lot of the questions I’ve seen in various forums online […]
Building a DIY Wind Simulator – Part 1
In today’s video, I’m going to show you how you can build your own DIY Wind Simulator with variable fan speeds based off your in-sim speed! In this Part 1 video, I cover the hardware and software configuration and go for a test drive to see how well it works. In Part 2 I’ll refine […]